Fast Track Troubleshooting
Model:
RF30HB
Publication # MY RF30HB Production Date 05/13/2014
IMPORTANT SAFETY NOTICE
–
“For Technicians Only”
This service data sheet
is intended for use by persons having electrical, electronic, and mechanical experience and
knowledge at a level generally considered acceptable in the appliance repair trade. Any attempt to
repair a major appliance may result in personal injury and property damage. The manufacturer or
seller cannot be responsible, nor assume any liability for injury or damage of any kind arising from
the use of this data sheet.
Bulletins:
Support Information:
HELP: 1-888-751-4086 (Tech Sup. – ASC/SSD)
1-866-894-0637 (Tech Sup. - FE/ME)
GSPN:
http://service.samsungportal.com/EP/web/portal/jsp/EP_Default1.jsp
http://my.plus1solutions.net/clientPortals/samsung
Sales Mode:
No Heating or Cooling. No
compressor Operation. Press Energy
Saver and Freezer buttons
simultaneously for 3 seconds ( You will
hear a Ding Dong ) to remove or put
into sales mode. When in the sales
mode, the display will show
‘’O-FF”
Removing power will not cancel this
mode.
Self Diagnosis:
Force Mode:
①
If Energy Saver and Lighting Key
are pressed simultaneously for
6 seconds, ALL ON/OFF will
blink with 0.5interval for 2
seconds.
②
If take the
finger off from above
keys and press Fridge, load
condition mode will be started.
Load Mode
3) Load condition display function will maintain for
30 seconds and then normal condition will be
returned automatically. (Refer to page 4 for
Load Mode checklist)
• If Energy Saver Key +
Fridge/Hold 3 sec for Power
Cool Key on the front of panel
are pressed simultaneously for
8 seconds , it will be changed to
the test mode and all displays
on the front of panel will be off.
• If any key on the front of panel
is pressed within 15 seconds
after the test mode, it will be
operated as below sequence :
Manual operation1(FF) Manual
operation2(OF r) -> manual
defrost of fresh food
compartments(rd) -> manual
defrost of fresh and freezer
compartments(Fd) ->
cancel(Display all off)
• If any key on the front of panel
is not pressed within 15
seconds after the test mode,
the test mode will be canceled
and it will be returned to
previous mode.
If Energy Saver Key + Lighting Key are
pressed simultaneously for 8 seconds
(including above 2 seconds), self-
diagnostic function will be selected.
At this moment, if there is an error, display
of error will be operated for 30
seconds and then return to normal
condition whether problem is
corrected or not.(Refer to self-
diagnosis CHECK LIST
)
Содержание RF30HB
