Dometic BUTTNER MT ICC 1600 SI-N, Инструкция по установке и эксплуатации

Страница: 22 / 140

22 4445103626
Battery type and charging program AC input power booster
Remote switch (MT ICC 1600 SI-N)
Ground switch at 230 V output (MT ICC
3000 SI-N)
Remote switch (MT ICC 3000 SI-N)
Using the device
Operation on mains power when 230 V
AC input is available
The device always turns on automatically when
grid or an alternator is connected to the AC input
and a battery installed. This behavior is not affected
by the remote switch position.
Switch Switch Switch Description
4=OFF 5=OFF 6=OFF Lead acid
• Absorption voltage
= 14.4 V
• Float voltage =
13.2 V
4=OFF 5=OFF 6=ON Gel
• Absorption voltage
= 14.4 V
• Float voltage =
13.5 V
4=OFF 5=ON 6=OFF AGM 1
• Absorption voltage
= 14.4 V
• Float voltage =
13.2 V
4=OFF 5=ON 6=ON AGM 2
• Absorption voltage
= 14.7 V
• Float voltage =
13.2 V
4=ON 5=OFF 6=OFF LiFePO4 – 13.9 V
• Absorption voltage
= 13.9 V
• Float voltage =
13.5 V
4=ON 5=OFF 6=ON LiFePO4 – 14.2 V
• Absorption voltage
= 14.2 V
• Float voltage =
13.4 V
4=ON 5=ON 6=OFF LiFePO4 – 14.4 V
• Absorption voltage
= 14.4 V
• Float voltage =
13.8 V
4=ON 5=ON 6=ON LiFePO4 – 14.6 V
• Absorption voltage
= 14.6 V
• Float voltage =
13.5 V
Switch Description
7=ON Power boost from battery active.
7=OFF No power boost from battery.
Switch Description
8=ON Remote switch bypassed. Unit cannot be
switched off entirely anymore and con-
sumes approx. 90 mA in standby mode.
8=OFF Control by remote switch. Remote switch
must be connected and switched on in
order to activate the device.
Switch Description
9=ON N and PE are connected.
9=OFF N and PE are separated.
Switch Description
10=ON Remote switch bypassed. The unit cannot
be switched off entirely anymore and con-
sumes approx. 113 mA in standby mode.
10=OFF Control by remote switch. Remote switch
must be connected and switched ON in
order to activate the device.