Dometic 9600011575, Руководство по установке

Страница: 15 / 220

15
EN
RTX1000/2000, SPX1200T Configuring the system software
7.3 P.02: Unit for temperature display
The system can display the room temperature in °C or °F.
➤
Switch to configuration mode (chapter “Entering and exiting configuration
mode” on page 13).
✓
The display shows “P.01” and the symbol flashes.
➤
Press the or button to select the menu item P.02.
✓
The display shows “P.02” and the symbol lights up.
➤
Press the button to change the setting.
✓
The code for the current setting is displayed:
–
0: °C
– 1: °F
➤
Use the or button to select the desired temperature unit.
➤
Press the button to save the setting.
✓
The set value is saved and is then applied when the system is restarted.
✓
You are then returned to the menu and can select another menu item by
pressing the
or button.
7.4 P.05: Tilt sensor
The electronics of the system prevents that the system is switched on when the
vehicle is parked at a slope. Since some vehicles‘ roof already is tilted, the tilt
sensor has to calibrated to the zero setting before first use.
➤
Park the vehicle on a level place.
➤
Switch to configuration mode (chapter “Entering and exiting configuration
mode” on page 13).
✓
The display shows “P.01” and the symbol flashes.
➤
Press the or button to select the menu item P.05.
✓
The display shows “P.05”.
➤
Press the button to change the setting.
✓
The code for the current setting is displayed.
➤
Use the or button to select “1”.
➤
Press the button to save the setting.
✓
The set value is saved and is then applied when the system is restarted.
✓
You are then returned to the menu and can select another menu item by
pressing the
or button.
0$157;63;7,VERRN6HLWH'RQQHUVWDJ0lU]