Dometic GROUP WAECO MagicSpeed MS-BE3, Инструкция по установке и эксплуатации

Страница: 20 / 176

EN
Safety and installation instructions MagicSpeed Accessory
20
I
NOTE
Supplementary information for operating the product.
➤ Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓ This symbol describes the result of an action.
fig.
1
5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2 Safety and installation instructions
The manufacturer accepts no liability for damage in the following cases:
 Damage to the product resulting from mechanical influences and excess
voltage

Alterations to the product without express permission from the manu-
facturer
 Use for purposes other than those described in the operating manual
Please observe the prescribed safety instructions and stipulations
from the vehicle manufacturer and service workshops.
!
WARNING!
Inadequate supply cable connections could result in short circuits,
which could have as a consequence that:
 Cable fires occur
 The airbag is triggered
 Electronic control devices are damaged
 Electric functions fail (indicators, brake light, horn, ignition,
lights)
A
NOTICE!
To prevent the risk of short circuits, always disconnect the negative
terminal of the vehicle's electrical system before working on it.
If the vehicle has an additional battery, its negative terminal should
also be disconnected.