Domel AZ 108, Инструкция по эксплуатации, Страница: 31 / 50

AZ motor Edition 4
Instructions for bearings replacement 31
MOTORS AZ 108, AZ 150, AZ 220 MOTOR AZ 84
Step 15: Removing the front bearing
You will need 2 or 3 handed puller (i) for this step. We recommend using the puller from
KUKKO manufacturer (
www.kukko.com ) with small pulling arms.
The pulling force must act exactly in the direction of the axis. Be
careful not to damage the bearing seat on the shaft, shaft end, the
thread in the shaft or rotor with magnets.
Front bearing must not be used again.
RISK OF INJURY.
If you use other tools for bearing removal, secure the bearing e.g.
by sticking it with tape or inserting parallel key. It is possible that
by applying the force bearing will suddenly fly away and injury
you.
When removing front bearing press only on the shaft. Do not press
on the ring where magnets are placed. It can damage the rotor.
Place rotor with shaft on a flat surface. Disassemble the front bearing (pos. 7) from the shaft
(pos. 6) with the appropriate instrument, e.g. a puller.