
Assembling the device
74
Installation
Install the Siedle VARIO 611 /
Siedle VARIO Steel module
properly in accordance with the
Siedle Vario installation
instructions.
Turn the connection terminal anti-
clockwise by approx. 45°.
Centre the connecting terminal in
this position on the bearing plate.
Turn the connecting terminal
clockwise by about 45° until it
clicks into place.
The terminal descriptions can now
be read vertically above one
another.
Make sure that there is no
voltage present.
Attach the connection cables with
the cable clamps to the bottom of
the housing.
Connect the connection cables
according to the corresponding
wiring diagram.