Dolmar PC-7312 HappyStart, Руководство по обслуживанию

Страница: 9 / 24

9
DOLMAR GmbH
Neues Foto
4
3
4
2
1
04 Ignition system
04-03 Removing the ignition/ short circuit
cable
Push throttle control rod towards the cylinder
using pointed pliers, pulling upwards out of
the guide of the gas grip (arrow). 04-03 Removing the ignition/ short circuit
cable
Remove intake elbow with carburetor and
choke shaft from the tank housing.
04-03 Assembling the ignition/ short
circuit cable
When mounting the short circuit cable, make
sure that the connection between the connec-
tor lug of the short circuit cable and the
contact spring is in order (arrow). 04-03 Removing the ignition/ short circuit
cable
Pull short circuit cable (1) from its place in the
choke shaft (2).
Loosen earth cable (3) from the socket con-
nection of the contact spring (4).
04-03 Assembling the ignition/ short circuit
cable
As a safety measure, the short circuit cable
will be laid during assembly in the brackets
underneath the ignition cable.
04-03 Assembling the ignition/ short circuit
cable
Twist ignition cable into the ignition armature.
Note: To prevent moisture leaking in, fill
protective cap (4) with silicon paste
980.007.100 before replacing.