Dolmar PC-7312 HappyStart, Руководство по обслуживанию

Страница: 7 / 24

7
DOLMAR GmbH
STOP
9
10
11
1
0,5 mm
2
1
4
3
2
04 Ignition system
04-01 Checking the spark plug
Remove filter hood.
Pull spark plug socket (1) off the spark plug
and remove spark plug (2). 04-01 Checking the spark plug
Connect spark plug (2) with plug socket and
hold to earth (3). Pull out starter cable. If no
spark is produced, repeat procedure with new
spark plug.
Note: Switch (4) must be in position “I”.
04-01 Checking the spark plug
The spark plug has serious oil carbon depos-
its. Clean or replace spark plug. 04-01 Checking the spark plug
Combustion and motor performance will be
improved if the spark plugs function properly.
Dirty or faulty spark plugs should therefore
be cleaned or replaced.
04-02 Replacing the plug connector
Hold the plug connector spring using pointed
pliers and push the rubber cap backwards
over the ignition cable.
Note: grease the ignition cable slightly
beforehand.
04-01 Checking the spark plug
Spark plug is showing signs of wear (burning
off) on the middle electrode.
Spark plug must be replaced.