Dolmar PC-7312 HappyStart, Руководство по обслуживанию

Страница: 13 / 24

13
DOLMAR GmbH
1
2
3
7
9
8
10
6
4
5
10
06 Carburetor
06-03 Carburetor - testing the control
membrane
After removing the control diaphragm, it
must remain flat. The rim around the stiffen-
ing plate (7) must be even. Faulty diaphragm
must be replaced immediately.
06-04 Carburetor - dismantling the pump
side
Unscrew cover (8). Remove seal (9) and
diaphragm (10) from the carburetor.
06-03 Carburetor - testing the control unit
After removing the control diaphragm,
remove the intake pin with valve rocker and
spring.
Note: If there is visible wear (arrows), the
control unit must be replaced.
06-03 Carburetor - dismantling the con-
trol side
Unscrew cover (1). Carefully remove the
seal (2) and diaphragm (3) from the control
lever (4). Remove control lever, spring (5)
and inlet needle (6) from the carburetor.
06-04 Carburetor - Testing the pump mem-
brane
The two valve flaps (arrow) must rest flat on the
body of the carburetor. Damaged diaphragms
must be replaced immediately, as starting and
running problems may otherwise occur. 06-04 Carburetor - Testing the fuel sieve
The fuel filter (11) may be carefully removed
from the carburetor body for cleaning with a
pointed object. After cleaning replace the fuel
filter with a pin.