3
General Instructions
To ensure correct operation, user has to read this instruction manual to make
–
himself familiar with the handling of the brush cutter/string trimmer. Users
insufficiently informed will risk danger to themselves as well as others due to
improper handling.
It is recommended only to lend the brush cutter/string trimmer to people who
–
have proven to be experienced with brush cutter/string trimmers.
Always hand over the instruction manual.
First users should ask the dealer for basic instructions to familiarize oneself
–
with the handling of an engine powered cutter.
Children and young persons aged under 18 years must not be allowed to
–
operate the brush cutter/string trimmer. Persons over the age of 16 years
may however use the device for the purpose of being trained only whilst
under supervision of a qualified trainer.
Use brush cutter/string trimmers with the utmost care and attention.
–
Operate the brush cutter/string trimmer only if you are in good physical
–
condition.
Perform all work calmly and carefully. The user has to accept liability for
others.
Never use the brush cutter/string trimmer after consumption of alcohol or
–
drugs, or if feeling tired or ill.
National regulation can restrict the use of the machine.
–
WARNING: This power tool produces an electromagnetic field during
operation.
This field may under some circumstances interfere with active or
passive medical implants. To reduce the risk of serious or fatal
injury, we recommend persons with medical implants to consult
their physician and the medical implant manufacturer before
operating this machine.
Intended use of the machine
The brush cutter/string trimmer is only intended for cutter grass, weeds,
–
bushes, undergrowth it should not be used for any other purpose such as
Edging or hedge cutting as this may cause injury.
Personal protective equipment
The clothing worn should be functional and appropriate, i.e. it should be tight-
–
fitting but not cause hindrance. Do not wear either jewelry or clothing which
could become entangled with bushes or shrubs.
In order to avoid either head, eye, hand or foot injuries as well as to protect
–
your hearing the following protective equipment and protective clothing must
be used during operation of the brush cutter/string trimmer.
Always wear a helmet where there is a risk of falling objects. The protective
–
helmet (1) is to be checked at regular intervals for damage and is to be
replaced at the latest after 5 years. Use only approved protective helmets.
The visor (2) of the helmet (or alternatively goggles) protects the face from
–
flying debris and stones. During operation of the brush cutter/string trimmer
always wear goggles, or a visor to prevent eye injuries.
Wear adequate noise protection equipment to avoid hearing impairment (ear
–
muffs (3), ear plugs etc.).
The work overalls (4) protect against flying stones and debris. We strongly
–
recommend that the user wears work overalls.
Special gloves (5) made of thick leather are part of the prescribed equipment
–
and must always be worn during operation of the brush cutter/string trimmer.
When using the brush cutter/string trimmer, always wear sturdy shoes (6)
–
with a non-slip sole. This protects against injuries and ensures a good footing.
Residual risks
Even when the power tool is used as prescribed it is not possible to eliminate all
residual risk factors. The following hazards may arise in connection with the
power tool’s construction and design:
1. Damage to lungs if an effective dust mask is not worn.
2. Damage to hearing if effective hearing protection is not worn.
3. Damages to health resulting from vibration emission if the power tool is being
used over longer period of time or not adequately managed and properly
maintained.
Starting up the brush cutter
Please make sure that there are no children or other people within a working
–
range of 15 meters (50 ft), also pay attention to any animals in the working
vicinity.
Before use always check that the brush cutter/string trimmer is safe for
–
operation:
Check the security of the cutting tool, the control lever for easy action and
check for proper functioning of the control lever lock.
Rotation of the cutting tool during idling speed is not allowed. Check with your
–
dealer for adjustment if in doubt. Check for clean and dry handles and test
the function of the start/stop switch.
15 Meters
Diagrammatic figure
SAFETY INSTRUCTIONS
