15
First place the machine on the ground.
–
Give a gentle push on the primer pump (2) repeatedly (7 – 10 times) until fuel
–
comes into the primer pump.
Push the choke lever (3) to the position “
–
”.
Firmly hold the clutch case by your left hand, as illustrated.
–
Slowly pull the starter grip until resistance is felt and continue with a smart
–
pull.
Do not pull out the starter rope to its full extent and do not allow the starter
–
handle to be retracted without control, but ensure that it is retracted slowly.
Repeat the starting operation until initial ignitions are heard.
–
When the engine start, return the choke lever to “
–
”. Please note that the
choke lever will return to “
” position automatically when the throttle lever is
operated and the throttle is opened.
Observe the applicable accident prevention regulations.
Starting
Move at least 3 m away from the place of refuelling. Place the brush cutter on
a clean piece of ground taking care that the cutting tool does not come into
contact with the ground or any other objects.
Cold start
For machine with U Handle
Push the I-O switch (1) in the direction shown by the arrow.
–
POINTS IN OPERATION AND HOW TO STOP
(1)
(3)
(2)
