6
Never straighten or weld damaged cutting tools.
Operate the
–
brush cutter/string trimmer with as little noise and contamination
as possible. In particular check the correct setting of the carburetor.
Clean the
–
brush cutter/string trimmer at regular intervals and check that all
screws and nuts are well tightened.
Never service or store the brush cutter/string trimmer in the vicinity of naked
–
flames.
Always store the brush cutter/string trimmer in locked rooms and with an
–
emptied fuel tank.
When cleaning, servicing and storing the equipment, always attach the cover
–
to the cutting blade.
Observe the relevant accident prevention instructions issued by the relevant trade associations and by the insurance companies.
Do not perform any modifications on the
brush cutter/string trimmer as this will endanger your safety.
The performance of maintenance or repair work by the user is limited to those activities as described in the instruction manual. All other work is
to be done by an Authorized Service Agent. Use only genuine spare parts and accessories released and supplied by DOLMAR.
Use of non-approved accessories and tools means increased risk of accidents. DOLMAR will not accept any liability for accidents or damage
caused by the use of non-approved cutting tools and fixing devices of cutting tools, or accessories.
Vibration
People with poor circulation who are exposed to excessive vibration may
–
experience injury to blood vessels or the nervous system. Vibration may
cause the following symptoms to occur in the fingers, hands or wrists: “Falling
asleep” (numbness), tingling, pain, stabbing sensation, alteration of skin color
or of the skin. If any of these symptoms occur, see a physician!
To reduce the risk of “white finger disease”, keep your hands warm during
–
operation and well maintain the equipment and accessories.
First Aid
In case of accident make sure that a first-aid box is available in the vicinity of
the cutting operations. Immediately replace any item taken from the first aid box.
When asking for help, please give the following
information:
Place of accident
–
What happened
–
Number of injured persons
–
Kind of injuries
–
Your name
–
For European countries only
EC Declaration of Conformity
The undersigned, Tamiro Kishima and Rainer Bergfeld, as authorized by Dolmar GmbH, declare that the DOLMAR machine (s) :
Designation of Machine: Brush Cutter/String Trimmer
Model No./ Type: MS-24 U
Specifications: see “TECHNICAL DATA” table
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following standards or standardized documents:
EN ISO 11806-1, EN ISO 14982
The technical documentation is on file at:
Dolmar GmbH,
Jenfelder Straße 38, Abteilung FZ,
D-22045 Hamburg
The conformity assessment procedure required by Directive 2000/14/EC was in Accordance with annex VI.
Max. sound power values: 108.93 dB (A)
Max. guaranteed sound power values: 114 dB (A)
28. 12. 2011
Tamiro Kishima
Managing Director
Rainer Bergfeld
Managing Director
