Dodge Neon 2001, Руководство по обслуживанию

Страница: 620 / 743

(31) TRANSFER GEAR BEARING ADJUST-
MENT:
(a) Install a 4.66 mm (0.184 in.) gauging shim
on the transfer shaft (Fig. 112).
(b) Install transfer shaft gear using Tool 6261.
Using Tool 6259, install transfer shaft gear retain-
ing nut to 271 N·m (200 ft. lbs.).
(c) Measure end play. Attach Tool L4432 to the
transfer gear.
(d) Mount a steel ball with grease into the end
of the transfer shaft.
(e) Push and pull the gear while rotating back
and forth to ensure seating of the bearing rollers.
(f) Using a dial indicator, measure transfer shaft
end play.
(g) Refer to the transfer shaft bearing shim
chart for the required shim combination to obtain
the proper bearing setting.
(h) Use Tool 6259 to remove the retaining nut
and washer. Remove the transfer shaft gear using
Tool L4407A.
(i) Remove the gauging shim (Fig. 112) and
install the proper shim indicated by the chart.
TRANSFER SHAFT BEARING SHIM CHART
End Play Shim Needed Part Number End Play Shim Needed Part Number
0.05mm
(0.002 in.)
4.66mm
(0.183 in.)
4505588AB
0.76mm
(0.030 in.)
3.94mm
(0.155 in.)
4412818AB
0.08mm
(0.003 in.)
4.62mm
(0.182 in.)
4412835AB
0.79mm
(0.031 in.)
3.90mm
(0.154 in.)
4412817AB
0.10mm
(0.004 in.)
4.58mm
(0.180 in.)
4412834AB
0.81mm
(0.032 in.)
3.90mm
(0.154 in.)
4412817AB
0.13mm
(0.005 in.)
4.58mm
(0.180 in.)
4412834AB
0.84mm
(0.033 in.)
3.86mm
(0.152 in.)
4412816AB
0.15mm
(0.006 in.)
4.54mm
(0.178 in.)
4412833AB
0.86mm
(0.034 in.)
3.82mm
(0.150 in.)
4412815AB
0.18mm
(0.007 in.)
4.50mm
(0.177 in.)
4412832AB
0.89mm
(0.035 in.)
3.82mm
(0.150 in.)
4412815AB
0.20mm
(0.008 in.)
4.50mm
(0.177 in.)
4412832AB
0.91mm
(0.036 in.)
3.78mm
(0.149 in.)
4412814AB
0.23mm
(0.009 in.)
4.46mm
(0.175 in.)
4412831AB
0.94mm
(0.037 in.)
3.74mm
(0.147 in.)
4412813AB
0.25mm
(0.010 in.)
4.46mm
(0.175 in.)
4412831AB
0.97mm
(0.038 in.)
3.74mm
(0.147 in.)
4412813AB
0.28mm
(0.011 in.)
4.42mm
(0.174 in.)
4412830AB
0.99mm
(0.039 in.)
3.70mm
(0.146 in.)
4412812AB
0.30mm
(0.012 in.)
4.38mm
(0.172 in.)
4412829AB
1.02mm
(0.040 in.)
3.66mm
(0.144 in.)
4412811AB
0.33mm
(0.013 in.)
4.38mm
(0.172 in.)
4412829AB
1.04mm
(0.041 in.)
3.66mm
(0.144 in.)
4412811AB
Fig. 112 Install Transfer Shaft Gear and (Select)
Shim
1 - TRANSFER SHAFT GEAR
2 - BEARING CUP RETAINER
3 - SHIM (SELECT)
PL
41TE AUTOMATIC TRANSAXLE 21s - 105
41TE AUTOMATIC TRANSAXLE (Continued)
ProCarManuals.com
2001 NEON