Dodge Neon 2001, Руководство по обслуживанию

Страница: 612 / 743

(7) Install guide bracket into position and insert
pivot shaft (Fig. 86).
(8) Install anchor shaft and plug (Fig. 87). Make
sure guide bracket and split sleeve are in contact
with the rear of the transaxle case.
(9) Install low/reverse piston return spring (Fig.
88).
(10) Install low/reverse spring compressor into
position (Fig. 89). Compress low/reverse piston and
install snap ring as shown in (Fig. 90).
Fig. 86 Pivot Shaft and Guide Bracket
1 - ANTIRACHET SPRING
2 - GUIDE BRACKET
3 - PIVOT SHAFT
4 - PAWL
Fig. 87 Install Anchor Shaft and Plug
1 - GUIDE BRACKET ANCHOR SHAFT
2 - PIVOT SHAFT
3 - ANCHOR SHAFT PLUG
Fig. 88 Low/Reverse Piston Return Spring
1 - LOW/REVERSE PISTON RETURN SPRING
2 - PISTON
Fig. 89 Compressor Tool in Use
1 - LOW/REVERSE CLUTCH RETURN SPRING
2 - SNAP RING (INSTALL AS SHOWN)
3 - TOOL 6057
4 - TOOL 5059
5 - TOOL 5058–3
PL
41TE AUTOMATIC TRANSAXLE 21s - 97
41TE AUTOMATIC TRANSAXLE (Continued)
ProCarManuals.com
2001 NEON