Dodge Neon 2001, Руководство по обслуживанию

Страница: 518 / 743

(8) Remove shift cable-to-bracket clips (Fig. 4).
(9) Disconnect shift selector and crossover cable
from levers (Fig. 4). Remove cables and secure out of
the way.
(10) Disconnect the vehicle speed sensor connector
(Fig. 5).
(11) Raise vehicle on hoist.
(12) Remove transaxle oil drain plug and drain oil
into a suitable container.
(13) Remove both axle shafts. Refer to Group 3,
Differential and Driveline for the correct procedures.
(14) Remove structural collar (Fig. 6).
(15) Remove the left engine-to-transaxle lateral
bending brace (Fig. 6).
(16) Remove bellhousing dust cover (Fig. 6).
(17) Remove the right engine-to-transaxle lateral
bending brace (Fig. 7).
(18) Remove starter motor (Fig. 8).
(19) Remove drive plate-to-clutch module bolts.
(20) Support engine at oil pan with screw jack and
wood block.
(21) Remove transaxle upper mount thru-bolt.
Gain access to this bolt through the driver’s side
wheel house (Fig. 9).
Fig. 3 Clutch Slave Cylinder Connection
1 - SLAVE CYLINDER
2 - HYDRAULIC TUBE
Fig. 4 Shift Cables at Transaxle
1 - SHIFT CABLES
2 - CLIPS
3 - BRACKET
Fig. 5 Vehicle Speed Sensor Connector
1 - CONNECTOR
2 - SENSOR
3 - O-RING
4 - SPEEDO PINION
PL
A578 MANUAL TRANSMISSION 21s - 3
A578 MANUAL TRANSMISSION (Continued)
ProCarManuals.com
2001 NEON