Dodge 2009 Aspen, Руководство пользователя

Страница: 21 / 133

INSTRUMENT CLUSTER DESCRIPTION
1. Fuel gauge
The fuel gauge shows level of fuel in the tank when
ignition switch is in the ON position.
2. Temperature gauge
The temperature gauge indicates engine coolant tem-
perature. Any reading within the normal range indicates
that the cooling system is operating satisfactorily. The
gauge needle will likely indicate a high temperature
when driving in hot weather, up mountain grades, in
heavy traffic, or when towing a trailer. If the needle rises
to the “H” mark, stop the vehicle, and shift into NEU-
TRAL and increase engine speed for two to three min-
utes. If the temperature reading does not return to
normal, see your authorized dealer for service immedi-
ately.
CAUTION!
Do not leave your vehicle unattended with the en-
gine running as you would not be able to react to the
temperature indicator if the engine overheats.
The gauge pointer will remain near its last reading when
the engine is turned off. It will return to a true reading
when the engine is restarted.
3. Turn Signal Indicators
When a turn signal is activated, a right-pointing or
left-pointing arrow lights up and flashes to indicate the
direction of the turn. These indicators also indicate
proper operation of the front and rear turn signal lights.
If either indicator flashes at a faster rate than normal,
check for a defective bulb. If either indicator fails to light
up when the lever is moved, check for a defective fuse or
turn signal LED. A single chime is activated when the
INSTRUMENT PANEL AND CONTROLS 19
4