Dodge 2009 Aspen, Руководство пользователя

Страница: 25 / 133

16. Gear Selector
The electronic gear selector display is self-contained
within the instrument cluster. It displays the position of
the automatic transmission shift lever, and the relation of
each position to all other positions. For a good signal the
display will place a box around the selected transmission
range (PRND21). If the PRND21 displays all characters
boxed, have the system checked by an authorized dealer.
17. Trip Odometer
The two trip odometers show individual trip mileage. To
switch from odometer to trip odometers, press and
release the Trip Odometer button.
To reset a trip odometer, display the desired trip odom-
eter to be reset then push and hold the button until the
display resets (approximately two seconds).
Engine Run time
Engine Run Time shows the time that the gasoline engine
has run. While viewing the odometer reading press and
hold the TRIP button for approximately six seconds and
the Engine Run Time will be displayed.
Vehicle Warning Messages
For non-Electronic Vehicle Information Center (EVIC)
equipped vehicles, when the appropriate conditions ex-
ist, messages such as “door ajar” (indicates that a door(s)
may be ajar), “gASCAP” (which indicates that your gas
cap is possibly loose or damaged),
9
CHANgE OIL”
(indicates that the engine oil should be changed), “Lo-
WASH” (low washer fluid), and “noFUSE” (indicates
that the IOD fuse is removed from the Integrated Power
Module), will display in the odometer.
INSTRUMENT PANEL AND CONTROLS 23
4