28
DC-ITD-FTIR-MAN01
www.dodtec.com
FEB 2020
815-788-5200
FTIR Manual
5.3.2.3 Setup > Configuration > Alarm Levels
Pressing the “Alarm Levels” tab while in the Setup >
Configuration menu will bring you to the Alarm Levels
screen (Fig 5.11).
Figure 5.11
From here, you can set the concentration threshold of Alarm Level 1, Alarm Level 2, and Lower Explosive Limit
for each individual point. The Revert button will erase any changes and the save button will store all changes
5.3.3 Setup > FTIR
Pressing the “FTIR” button at the top of the Setup Menu will bring you to the FTIR menu and display the Point
Gas screen (Fig 5.12). Press the “Back” button at any time while in the
FTIR menu to return to the Setup
menu.
5.3.3.1 Setup > FTIR > Point Gas
The Point/Gas screen will automatically display upon entering the FTIR menu. From here, you can select
which gases each point will be configured to monitor
. Press directly on a box to turn a point’
s gas on or off
(see below).
Press the “Save” button to save your changes, or the “Revert” button to reset to defaults.
The
“Clear All” button will remove the selections for all gases on all points.
