Docomo Style F-02A, Инструкция по эксплуатации

Страница: 67 / 469

65
Voice/Videophone Calls
Operation
Changing videophone settings
You can set actions to be performed when videophone call fails, or set the screen
to appear during a videophone call.
･
Auto redial as voice is provided to ensure access to the other party. When "ON" is
set, the number is re-dialed as a voice call if the call cannot be answered because
the other party's terminal does not support videophone, or the other party is
using the mova service via Dual Network Service. However, this option may not
work properly if you dialed ISDN-sync 64K access point, ISDN videophone
incompatible with 3G-324M (as of November, 2008), or a wrong number, etc.
Note that you may be charged for these calls.
1
m
[Settings & NW services]
63 e
Set required items
e C
Auto redial as voice : Set whether to redial as voice call for unsuccessful
videophone attempt
Display setting : Set the screen
Sub screen : Set Sub screen
･
This setting is available when Display setting is "Both sides".
Screen size : Set the main screen view size
Visual preference : Set the incoming image quality of the other party
Display brightness : When "Terminal settings" is selected, it operates according
to Brightness of Display light
Speakerphone : Set whether to use speakerphone when connected
✔
INFORMATION
･
During a voice call or 64K data communication, no videophone calls can be made even
if Auto redial as voice is set to "ON". However, during packet communication connected
to a PC, dialed videophone call is re-dialed as voice call.
･
If you redial voice calls with Auto redial as voice set to "ON", the voice call rate is
applied instead of digital communication rate.
Notify switchable mode
Setting for switching a voice/videophone call
during a call
You can notify the network that your terminal is available for switching voice and
videophone calls.
･
It cannot be changed during a call.
･
You cannot set this option out of service area. Operate FOMA terminal in
locations with better radio wave conditions.
･
Notify switchable mode is ON by default.
1
m
[Settings & NW services]
67
2
1
or
2 e
"Yes"
･
Press
3
and select "Yes" to check the current settings.
DataSession arv. act
Setting actions for incoming calls during packet
communication
You can set how to react to an incoming videophone call received during i-mode,
data broadcasting site display or downloading Music&Video Channel program.
1
m
[Settings & NW services]
64 e 1
-
4
･
When "V.phone priority" is selected, displaying the incoming call screen has
precedence, and packet communication is disconnected when a videophone
call is answered. After videophone call is terminated, i-mode screen
reappears and download of Music&Video Channel program resumes. While
accessing data broadcasting site, Time shift of 1Seg is activated.
･
When "Packet DL priority" is set, an incoming call is disconnected without
incoming call screen being displayed, and the call is recorded in Received
calls.
･
When "Voice mail" or "Call forwarding" is selected, the service starts.
✔
INFORMATION
･
If you do not subscribe to Voice Mail or Call Forwarding Service, actions for "Packet DL
priority" are performed even with "V.phone answerphone" or "Call forwarding" set.
･
If Voice Mail or Call Forwarding Service is activated and the ring time is set to "0 sec.",
each service starts. The call is not recorded in Received calls.