Docomo Style F-02A, Инструкция по эксплуатации

Страница: 190 / 469

188
Camera
When setting to "ON", appears.
◆
Switching full–screen and standard screen modes
In full–screen mode, icons and the guide area are not displayed.
･
When an image is displayed on sub-display, switching is unavailable.
1
*
on the still image shooting screen
◆ Switching still image shooting and movie recording
･
Switching is not available in continuous panorama shooting.
1
On the shooting screen,
I
(1 sec. or more)
･
When key assign ( → P186) is set to "Movie camera"/"Still camera", press
I
to switch.
◆
Setting Auto timer
You can set so that the shutter clicks after specified time elapses.
･
When set, countdown starts while shooting, and the light blinks in green
synchronized with the countdown sound. The countdown sound and blinking of
the light go faster when the remaining time is reduced to a few seconds.
･
With auto focus function, countdown starts after auto focus is activated. When
using manual auto focus, countdown starts after focus is adjusted regardless of
the setting of full auto focus.
･
To cancel countdown, press
C
.
1
On the still image shooting screen,
m5 e 1
-
5
- appears indicating the number of seconds before the shutter is released.
✔
INFORMATION
･
Countdown is canceled in the cases below.
- When a call is received
- When the date and time specified in countdown timer, alarm clock or schedule come
- When
s
is pressed
- When FOMA terminal is opened/folded
･
Auto timer is not available for Continuous (Manual), 4 frames (Manual) and Panorama.
◆
Changing orientation of still image <Sense orientation>
The orientation of still image to be saved changes automatically according to the
orientation of FOMA terminal.
･
You can switch only when Sense orientation is set to "ON" in Still image settings.
･
You cannot switch in the cases below.
- For continuous panorama shooting
- When the second frame or later is shot in 4 frames (Manual)
- When Motion sensor is set to "OFF"
1
Change the orientation of FOMA terminal on the still image
shooting screen
indicates upward.
･
The right, left, upper and lower side of the display can be recognized as top.
◆
Switching face detection ON/OFF
When "ON" is set, the face of a person is detected automatically and the brightness
of face is adjusted.
･
Up to 10 face detection frames are displayed. The frame with the highest
detection rate is displayed in green. Other frames are displayed in white.
･
When a face is not detected, a white frame is displayed at the center of the screen.
･
This setting can be set only when Scene mode/effect is set to "Auto", "Portrait" or
"Landscape".
1
m73
on the still image shooting screen
✔
INFORMATION
･
Face detection may not work in cases below or under other shooting conditions.
- A face is turned away or tilted
- A face is partially covered with eye glasses, a hat, mask or shadow
- +A face is extremely small, large or dark against the entire screen
- A face is at the edge of the screen
◆
Displaying/Hiding grid line
Grid is gridded straight lines that guide shooting. Grids are not displayed on the
shot image.
･
Grids cannot be displayed when a frame is set.
1
D
on the still image shooting screen