
98
Settings
You can make settings related to networks
such as Wi-Fi, Bluetooth function.
An access point for connecting to the
Internet (sp-mode, mopera U) is already
registered. You can add or change it if
necessary.
By default, sp-mode (P.99) is set for the usual
access point.
Checking the access point you use
1
From the Settings screen (P.95),
tap [Wireless &
networks]
u
[Mobile
networks]
u
[Access Point Names].
・
Available access points (APN) appear.
・
It is recommended that you use the
displayed access point without editing.
❖
Information
・
If you have several available connections, a marked
radio button to the right indicates the active network
connection.
Setting an access point additionally
1
From the Settings screen (P.95),
tap [Wireless &
networks]
u
[Mobile
networks]
u
[Access Point Names].
2
Tap
t
.
3
Tap [New APN].
4
Tap [Name], enter a name and tap
[OK].
5
Tap [APN] and enter the access
point name and tap [OK].
6
Tap and enter all other
information required by your
network operator.
7
Tap
t
and [Save].
❖
Information
・
Do not change the MCC/MNC. If you change MCC/
MNC to other than the default value (440/10), the
settings do not appear on the APNs screen. When
the MCC/MNC settings do not appear on the APNs
screen, make APN settings with [Reset to default] or
[New APN] again.
Wireless & networks
Airplane mode
P.100
Wi-Fi/Wi-Fi settings
P.100
Bluetooth/Bluetooth settings
P.151
Tethering
P.104
VPN settings
P.106
Mobile networks
P.98, P.206
Setting an access point