Docomo Q-port.Phone SH-04D, Инструкция по эксплуатации

Страница: 113 / 188

111
SH-04D_E_07.fm
[111/116]
File Management
Set after enabling Bluetooth function.
To register/connect a Bluetooth device, the
Bluetooth passkey may need to be entered.
Before starting the registration, decide the 1- to
16-digit number. Enter the same number on the
handset and the other party’s Bluetooth device.
1
In the home screen, [
R
]
/
[Settings]
/
[Wireless &
networks]
/
[Bluetooth settings]
2
Select an item
Bluetooth : Enable Bluetooth function.
Device name : Change the handset’s name.
Discoverable : Set whether to receive a
search request from other Bluetooth devices.
Detailed Bluetooth Settings : Set Bluetooth
function.
･
When you connect multiple Bluetooth
devices to the handset simultaneously, set
Multiple connect standby to [ON].
Scan for devices : Search for the Bluetooth
devices around the handset and register
them in it. Depending on Bluetooth device, it
may start connecting after completing
registration.
･
Set the other party’s Bluetooth device to the
registration stand-by status in advance.
:
Touch a paired Bluetooth device for a
while
/
[Options…] to change the connection
type.
The radio interference with Wi-Fi
compatible devices
The Bluetooth devices use the same
frequency band (2.4 GHz) as wireless LANs
(IEEE 802.11b/g/n). Therefore, using the
Bluetooth device near a wireless LAN device
may cause the radio interference, lowering of
communication speed, noise or connection
fail. In this case, turn off the wireless LAN
device or keep the handset and the Bluetooth
device at least approximately 10 m away from
the wireless LAN.
Bluetooth settings
When hands-free (headset) and audio are
connected to the handset simultaneously, you
cannot hear the audio sound during a
hands-free call.
If you fail to connect, connection may become
available after re-registration of Bluetooth
devices.
[Bluetooth]
When the Bluetooth function is enabled, the
handset is set to receive a registration request/
connection request from other Bluetooth
devices. Enable Discoverable in advance to
allow the handset to be searched for by other
Bluetooth devices.
While in connection stand-by, even if a
connection request from a Bluetooth device is
received, connection may not be made
depending on the signal strength etc.
[Discoverable]
Setting is disabled automatically when the set
length of time has passed after enabling.
[Scan for devices]
For details on the operations of the other party’s
Bluetooth device, refer to the manuals of the
Bluetooth device to be used.
SH-04D_E.book 111 ページ ２０１２年２月１３日 月曜日 午後５時１分