Docomo Q-port.Phone SH-04D, Инструкция по эксплуатации

Страница: 79 / 188

77
SH-04D_E_04.fm
[77/81]
Call/Network Services
1
In the home screen, [
R
]
/
[Settings]
/
[Call settings]
/
[NWService]
/
[Voice mail service]
2
Select the service
Activate : Start Voice Mail Service.
Ring time : Set time to connect to Voice Mail
Service.
Deactivate : Stop Voice Mail Service.
Check setting : Check current settings.
Play messages : Play new message.
Setting : Set Voice Mail Service.
Check messages : Check new message.
Notification setting : Set to notify when a new
message is stored.
Missed call notification : If a call is received
while the handset is outside the service area
or turned off, SMS notifies the missed calls
received after the handset is turned on again
or returns to the service area.
Call Waiting Service is a service for placing the
current call on hold and answering a new
incoming call when the handset beeps during a
call to notify you of another call. In addition,
place the current call on hold and make a new
call.
When receiving another call during a call, a
beeping is heard.
1
In the home screen, [
R
]
/
[Settings]
/
[Call settings]
/
[NWService]
/
[Call waiting]
2
Select the service
Activate : Start Call Waiting Service.
Deactivate : Stop Call Waiting Service.
Check setting : Check current settings.
You can record up to 20 messages with the
recording time per message up to
approximately 3 minutes. Messages are saved
for up to approximately 72 hours.
When Call Forwarding Service is set to
“Activate”, Voice Mail Service is stopped
automatically.
[Ring time]
If you set Ring time to “0 sec.”, an incoming call
is directly connected to Voice Mail Service
center without being registered in the incoming
call history.
Call Waiting Service
Charges are incurred by a caller even when the
call is on hold.
Placing the current call on hold and making a
call to another party are possible even when
Call Waiting Service is deactivated.
SH-04D_E.book 77 ページ ２０１２年２月１３日 月曜日 午後５時１分