Docomo P-04B, Инструкция по эксплуатации

Страница: 114 / 162

4
The following three ways are available for connecting the FOMA terminal to another device:
Connect the FOMA terminal to a personal computer provided with the USB port using the FOMA USB
Cable with Charge Function 01/02 (option). (See page 6)
This way of connection applies to all communication systems such as packet communication, 64K data
communication, and data transfer.
≥
Set “USB mode setting” to “Communication mode” for data communication.
Operate “
m
1
Set./Service
1
Other settings
1
USB mode setting
1
Communication mode”.
≥
You need to install the FOMA communication configuration file (driver) before use.
Connect a Bluetooth communication compatible personal computer wirelessly to the FOMA terminal.
(See page 11)
This way of connection applies to packet communication and 64K data communication.
≥
When you perform data communication by using Bluetooth function, the high speed communication is applied to the FOMA
terminal. However, you may not be able to communicate at the maximum speed, because of the limit of communication speed of
Bluetooth function.
≥
Use a Bluetooth linked standard modem or a Bluetooth modem provided by the Bluetooth device maker. Contact the maker of
your personal computer or Bluetooth device maker for how to install and to set up.
By using infrared rays, you can send/receive data between your FOMA terminal and another FOMA
terminal, mobile phone, or personal computer provided with the infrared communication function.
This applies to data transfer only.
Connect FOMA Terminal to Other Devices
Use FOMA USB Cable with Charge Function 01/02
Use Bluetooth Communication
Use Infrared Communication