
Appendix/Index
160
5
Remote support starts when you are
connected
Reset the terminal to the default state. All installed
applications and saved data to the terminal, for the most part,
however, are deleted.
・
For disabling encryption of SD card, refer to "Encrypt SD
card".
→
P128
・
To erase SD card data, see "Erasing data in microSD card
(Format)".
→
P134
1
From the Home screen,
→
[Settings]
→
[Device management]
→
[Backup & reset]
2
[Factory data reset]
→
[RESET PHONE]
・
When a security unlock preference which requires
authentication is selected, authentication is required.
3
[ERASE EVERYTHING]
A short while after the reset is completed, the terminal will
be restarted.
・
Do not turn off the terminal while resetting phone.
✔
INFORMATION
・
If the terminal is reset while Privacy mode is set, data saved
in the microSD card to which Privacy mode is set cannot be
accessed. Make sure to disable Privacy mode with the
microSD card attached before resetting.
→
P124
・
When the touch panel is not working properly, etc. after
resetting, turn the terminal OFF and ON.
❖
Warranty
・
The terminal is provided with a written warranty. Make sure
that you receive it. Check the written contents and items
such as "
販売店名・お買い上げ日
(Shop name/date of
purchase)" and keep it in a safe place. If it does not contain
the necessary information, immediately contact the shop
where you bought it. The warranty is valid for a period of
one year from the date of purchase.
*
The Desktop Holder F51 is not covered by free repair service.
・
The specifications and appearance of the terminal and all
accessories are subject to change for the sake of
improvement without prior notice.
・
Since troubles, repair or other handling of the terminal may
cause contents in the phonebook etc. to be altered or
deleted. DOCOMO recommends making a copy of the
Phonebook data etc., in case.
*
Data such as phonebook entries in the terminal can be saved in a
microSD card.
*
Data such as phonebook entries can be backed using docomo cloud.
❖
After Sales Services
■
When problems occur
Before requesting repair, read the section on
"Troubleshooting" in this manual (
→
P153). If the problem still
persists, contact "Repairs" on the last page of this manual (in
Japanese only).
Resetting the terminal
Warranty and After-Sales
Service
Содержание M02
Страница 1: ...00 INSTRUCTION MANUAL 15 9 ...