Docomo Foma N705iu, Инструкция по эксплуатации

Страница: 89 / 518

87 Continued on next page
Ph
onebook
Setting Different FOMA
Terminal Actions for Each
Phone Number and Mail
Address
<Ring tone/Image>
You can set different ring tones or answer messages
for the Record message depending on groups, phone
numbers or e-mail address in the phonebook. This
function is useful when you want to distinguish the
caller only by the ring tone.
z
You cannot set this setting for “No Group” on the
FOMA terminal (Phone) or the phonebook or
groups on the FOMA card (UIM).
z
You cannot set “Illumination” and “My Signal
settings” at the same time.
z
The Ring tone/Image functions are disabled when
the caller does not notify the caller ID. It is
recommended to set the “Caller ID Request”
service.
1 Phonebook detail screen (P.83)
u
(FUNC) “Ring tone/Image”
The “Ring tone/Image
screen” appears.
“ ★ ” appears next to the
selected function.
The available functions vary
depending on the item
selected in the phonebook detail screen.
■
To set this function for each group
Group setting screen (P.82)
u
(FUNC) “Ring tone/Image”
2
Select the item to distinguish
Select the item from “Voice call (recv.)/V.phone
(dial/recv.)/Mail (recv.)”.
• When “Mail (recv.)” is selected, this function is
applied not only i-mode mail but SMS.
3
Select any item:
“ ★ ” appears next to the selected function.
■ To release a selected function
Highlight the function with “ ★ ”
o
(Reset)
The function is released and the “ ★ ” disappears.
Ring tone
*1
…… Sets ring tones to distinguish the
caller of the phone or sender of mail.
“Changing the Ring Tone” → P.92
Image
*1*2
……
Sets images to distinguish the caller
of the phone. “Changing the Display”
→
P.98
Chara-den setup
*3
…… Selects Chara-den to be
displayed as the substitute image for videophone
calls.
Illumination
*1*4
…… Sets the incoming call lamp
flashing patterns to distinguish the caller of the
phone or sender of mail.
“Setting the Flashing Mode of the Incoming Call
Lamp for Incoming Calls” → P.104
Vibrator
*1
…… Sets vibration patterns to distinguish
the caller of the phone or sender of mail.
“Setting the Vibration to Notify You of Incoming
Calls” → P.94
Answer message
*2
…… Changes the answer
message used when record message
*5
or quick
message starts up depending on the caller.
“Having the Caller Leave a Message” → P.72
My Signal
*6
…… Sets My Signal animations to
distinguish the caller of the phone or sender of mail.
* When highlighting an item while selecting an
animation, the animation appears on the My Signal.
*1: You can also distinguish the incoming 64K data
communication.
*2: Available only when “Voice call (recv.)” or “V.phone
(dial/recv.)” is selected.
*3: Available only when “V.phone (dial/recv.)” is
selected.
*4: You need to select “OFF” in “My Signal” (P.103) for
incoming call and receiving mail (“Calling”, “Mail”
and “Mail/Chat mail”) respectively beforehand.
*5: You need to set “Record message” to “ON”
beforehand.
*6: You need to set to display “My Signal” setting
(P.103) for incoming call and receiving mail
(“Calling”, “Mail” and “Mail/Chat mail”) respectively
beforehand.
■
When you set Ring tone/Image
An icon appears in the phonebook detail screen
indicating that each item is set.
: Ring tone (voice/
videophone call)
: Ring tone (mail)
: Illumination (voice/
videophone call)
: Illumination (mail)
: Vibration (voice/
videophone call)
: Vibration (mail)
: Image (voice/videophone call)
: Answer message (voice/videophone call)
: My Signal (Voice/Videophone call)
: My Signal (Mail)
: Chara-den (videophone call)
Ring tone/Image