Docomo Foma N705iu, Инструкция по эксплуатации

Страница: 485 / 518

32
4
Click the "
モデム
" (Modem) tab to
confirm the COM port of the "
接続
先 " (Access point) column of
"FOMA N705iµ" and click "OK"
The COM port confirmed here will be used in
the access point (APN) set up (p.32).
The contents displayed on the screen and the
COM port number differ depending on the PC.
Setting up the access point (APN)
Communication software to enter AT commands is required for the settings. This section describes
how to set it up using "Hyper terminal" that comes with Windows.
d
Windows Vista is not compatible with "Hyper terminal". For Windows Vista, set with compatible
software. (Follow the instructions for the setting of the software.)
Access points <APN/cid>
d
Normal telephone numbers are not used for access points for packet communication unlike 64K
data communication. Set up APN instead of a telephone number for connection.
d
The APN setting is just like registering a Phonebook for packet communication from a PC. Assign
registration number (cid) 1 through 10 to register, which is used as a part of the access point
number. As the APN of mopera "mopera.ne.jp" is assigned to cid1 and APN of mopera U
"mopera.net" to cid3 by default, assign the APN to cid2 or between cid4 to cid10.
*1
d
APN is administered by "cid (administration numbers 1 through 10)". Specifying " ＊ 99 ＊＊＊ <cid
number>
＃
" as the access point number enables the connection to the access point with the cid
number.
d
Specifying "
＊
99
＊＊＊
1
＃
" as the access point number for the mopera connection or "
＊
99
＊＊＊
3 ＃ " for the mopera U connection enables you to use mopera or mopera U easily.
*2
d
The APN setting registers the access point to the FOMA terminal just like registering other parties'
information (telephone number, etc.) on a mobile phone. The following are comparisons with the
Phonebook of the mobile phone:
d
Registered cid will be connection numbers in the dialup connection settings.
d
Contact your Internet service provider or network administrator for an access point (APN) other
than mopera U or mopera.
*1 ： Set up the APN setting for the access point (Internet service provider) on the FOMA terminal in advance instead of
entering APN in the Telephone Number column of "
ダイヤルアップネットワーク " (Dial-up Network) for connection.
*2 ： To connect to other Internet service providers, set the APN and assign it to cid2 or cid4 to cid10.
Default setting cid1 ： mopera.ne.jp cid3 ： mopera.net cid2, 4 to 10 ： not set
APN setting Phonebook of mobile phone
Data to be registered APN Phone number
cid Memory number of Phonebook
─
Other party's name
How to register Register using PC ○ (FOMA PC setting software, etc.) ○ (Dedicated software required)
Register using Mobile phone × (Cannot even confirm) ○
How to use Specify cid to connect Look up Phonebook to call
─
Enter the telephone number
directly from the dial key on the
FOMA terminal to call.