Docomo Foma N705iu, Инструкция по эксплуатации

Страница: 209 / 518

207 Continued on next page
Mail
z
When Manner mode is set, the beep is determined
by “Manner mode set”.
z
The FOMA terminal vibrates linked with the beep
regardless of the “Vibrator” setting.
●
When you receive the Area Mail other
than the earthquake early warning
When you receive the Area Mail, you are notified on
the “Receive Area Mail” or the “Description Screen”,
then notifies them with a beep for the Area Mail (the
screen is specified by the provider).
The “Receive Area Mail” screen returns to the
previous screen, if no operation is performed or you
press any key. The description screen returns to the
previous screen, when you press any key
d
,
t
and
y
.
z
The volume of the ring tone is set to the same
volume set at “Mail” of “Ring volume”.
Setting Early Warning “Area
Mail”
<Area Mail setting>
Make the settings for receiving Area Mail.
1 Mail Setting screen (P.202) “Area Mail
setting”
“Area Mail setting screen”
appears.
2 Select any item:
Receive setting (default: No) …… Sets whether to
receive the Area Mail.
• The confirmation message asking whether to use
Area Mail appears before setting, read the given
notes carefully and select “YES”/“NO”.
Beep setting
Beep setting (default: ON) …… Turns the beep
ON/OFF.
Beep time (default: 10 seconds) …… Sets the
beep time between 01 and 30 seconds.
Receive entry …… Registers the name of Area Mail
other than the urgent news flash that you want to
receive and Message ID. Select “<Not recorded>” at
the “Receive entry screen”, and enter “Area Mail
name” and “Message ID” after you enter your
security code. The urgent news flash is sent
regardless of the settings of Receive entry.
Sending and Receiving Chat
Mail
<Send/Receive chat mail>
You can exchange mail with several people just as if
you were having a normal conversation.
z
You cannot launch Chat mail in the following cases:
• When “ON” is selected in “Receive option
setting”
• If your Inbox is full of saved mail
• When 2in1 is in B mode
• While Original lock is set for “Sending mail” or
“Disp. recv. mail/msg.”
z
The communication fee for sending chat mail to
several people is the same as sending a mail with
multiple recipients.
1
o
“Chat Mail”
The “Chat screen” appears.
Members of the last chat are
set for the chat member.
■ To set chat members
You have to set chat
members when you activate
chat for the first time or
when you start chat with
members different from the
last chat members. → P.209
■ To activate chat from
the chat group list screen
You can activate chat by setting the chat group
members to chat members.
Chat group list screen (P.211)
u
(FUNC)
“Active chat”
2
d
(Select) Enter your message
You can enter up to 250 double-byte or 500
single-byte characters.
3
After entering the message,
d
(Set)
The entered message is displayed in the
message entry area.
N
z
The description screen or “Receive Area Mail” screen
may not appear when you receive the Area Mail
during using functions such as an i-
α
ppli or the
camera.
Area Mail setting
Chat
Function menu P.209