Docomo Foma N705iu, Инструкция по эксплуатации

Страница: 130 / 518

128
S
ecurity Settings
Checking the restriction settings
1 Phonebook list screen (P.83)
u
(FUNC) “Restrictions” Enter your
security code
The “Restrictions screen”
appears.
Restrictions screen (P.128)
Check settings
……
Displays a list of the phonebook
entries for which the function is set.
Release settings …… Releases the function and “ ★ ”
disappears.
Rejecting Calls from
Unidentified Callers
<Call setting w/o ID>
You can accept or reject voice/videophone calls from
callers who do not provide the caller ID depending on
the reason for no caller ID.
1
i
“SETTINGS” “Lock/Security”
“Call setting w/o ID” Enter your
security code Select any item:
Unknown …… Specifies whether to accept or reject
calls from callers who are unable to provide the
caller ID, such as calls from overseas or calls from
ordinary phones sent via a call forwarding service.
Some phone companies provide caller IDs.
Payphone
……
Specifies whether to accept or reject
calls dialed from pay phones.
User unset …… Specifies whether to accept or reject
calls made by callers who withhold their caller IDs.
2 “Accept” or “Reject”
■ When “Accept” is selected
“Select ring tone” or “Select calling disp.”
• Select the ring tone from “Same as ring tone/
Melody/i-motion/Music/Voice announce/
Random melody/OFF” for “Select ring tone”
(when “Same as ring tone” is selected, the
“Phone” setting of “Select ring tone” is used).
• Select the calling display from “Same as
display/My picture/i-motion” for “Select calling
disp.” (when “Same as display” is selected, the
“Calling” setting of “Display setting” is used).
■ When “Reject” is selected
The call is rejected and the other party hears the
busy tone.
Muting Ring Tones for Callers
Not Stored in the Phonebook
<Ring time (sec.)>
You can set the mute period for the ring tone for
voice/videophone calls from the phone number which
is not stored in the FOMA terminal (Phone)
phonebook or UIM phonebook (Set mute seconds).
You can prevent accidentally dialing numbers, such
as nuisance calls that only ring for a short period from
Received calls record.
z
“Set mute seconds” also works when you receive a
voice/videophone call without caller ID or when
there is another incoming call during a voice/
videophone call.
z
You cannot set “Set mute seconds” when “Reject
unknown” is set to “Reject”.
1
i
“SETTINGS” “Incoming call”
“Ring time (sec.)” Select any item:
Set mute seconds
ON …… Enters the time for which the ring tone
is muted before starting up (01 to 99 seconds).
OFF …… Sets the time for which the ring tone is
muted before starting up to 0 second.
Restrictions
Function menu P.128
N
z
The ring tone or calling display selected in this
function is the setting for voice phone calls without
caller ID. When you receive videophone calls without
the caller ID, “Videophone” of “Select ring tone” or
“V.phone Calling” of “Display setting” is used.
z
When you receive a call from a caller who is set to
“Reject”, the call is rejected even when “Voice Mail” or
“Call Forwarding” service is set to “Activate”. However,
if the FOMA terminal is turned off or
“ ”
or if the
ringing time set for “Voice Mail” or “Call Forwarding” is
0 (zero) second, “Voice Mail” or “Call Forwarding” is
enabled.
z
The FOMA terminal receives i-mode mail and SMS
regardless of this function.