Docomo Foma N705iu, Инструкция по эксплуатации, Страница: 136 / 518

134
Camera
Before Using the Camera
You can use the FOMA terminal’s built-in camera to
shoot photos (still images) and movies.
z
You cannot activate the camera function or shoot
images when the FOMA terminal is folded.
Using the camera
● To set to camera mode
There are 2 ways as follows:
①
Select the desktop icon ( ) on the standby
screen
② Select “CAMERA” of the main menu or “Camera”
of Simple Menu
z
When there is no key operation for more than about
3 minutes, the camera mode ends automatically.
● Lens selector switch
z
To take a close-up image, set to the close-up mode
by moving the lens selector switch to
(macro
lens). When set to the close-up mode, the camera
is focused on an object approx. 6 to 8 cm away
from the camera.
z
To use Bar code reader or Text reader, set to the
close-up mode by moving the lens selector switch
to
(macro lens).
z
When you move the lens selector switch, move the
switch to the
●
(standard lens) position or the
(macro lens) position. Do not leave the switch in the
middle of these positions.
When using the camera
■ Notes on shooting
z
The camera of the FOMA terminal is made with the
extremely high-precision technology. However, it
may include lines or spots that look dark or bright.
Noises such as white lines may also appear on the
photographed images particularly when shooting in
very poorly lit locations.
z
Before shooting, wipe the lens clean with a soft
cloth. Fingerprints or grease spots on the lens
could prevent the camera from focusing properly
and cause blurred images.
z
Take care not to press the lens with excessive force
when folding the FOMA terminal. This may cause
malfunction.
z
Image quality may be adversely affected if the
FOMA terminal is left in a hot location for a long
period of time.
z
The color tones and brightness levels in still images
and movies shot may differ from those of the actual
object.
z
Do not leave the camera under the direct sunlight
for a long period of time or shoot the sun or a
powerful lamp directly. This could lead to the
discoloration of the photographed images or cause
the camera to malfunction.
z
Take care that your fingers, hair, or the strap do not
cover the lens when you shoot images.
z
The shooting uses a large amount of the battery. It
is recommended to turn off the camera
immediately after you finish shooting. The screen
may look dark or blurred if you shoot images when
the battery is low.
z
You cannot change or delete the volume of the
shutter sound and Auto timer tone. Also, you
cannot set the downloaded melody as the shutter
sound.
z
When shooting a still image, keep the FOMA
terminal steady until it emits the shutter sound and
finishes loading the shot image.
z
When you take pictures indoors, flickering may
appear due to the effect of fluorescent lighting, etc.
In such a case, changing the “Flicker” setting to the
electric wave frequency in the use region
additionally may suppress flickering.
z
After you display the shooting screen or change the
camera settings, it may take time for the brightness
or color tone to become its best.
N
z
To paste the desktop icon again after deleting it, select
“CAMERA” in step ② (procedure from main menu)
above and press
u
(FUNC) to select “Add desktop
icon”.
Lens selector switch
Using the standard lens
Slide to the position
Using the macro lens
Slide to the position