DoAll DC-330NC, Инструкция по эксплуатации

Страница: 3 / 39

PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATING THE MACHINE!
The followng regstered trademarks of the DoALL Company are used n ths manual:
DoALL, Imperal B-Metal, Kleen-Kool, and Tensgage.
MODEL FIRST SERIAL NO. LAST SERIAL NO.
DC-310NC 583-06101
PRINTED IN U.S.A. PB-527.1 (2-07)
For your information and future reference, pertinent data concerning your
machine should be written in the spaces provided above. This information is
stamped on a plate attached to your machine. Be sure to provide machine
model and serial numbers with any correspondence or parts orders.
Specifications contained herein were in effect at the time this manual was
approved for printing. The DoALL Company, whose policy is one of continu-
ous improvement, reserves the right, however, to change specifications or
design at any time without notice and without incurring obligations.
OPERATOR'S INSTRUCTION MANUAL
METAL CUTTING BAND SAW
DoALL SAWING PRODUCTS
2375B TOUHY AVENUE
ELK GROVE, ILLINOIS 60007 U.S.A.