DoAll C-8056SA, Инструкция по эксплуатации

Страница: 13 / 26

11
4.3.2 REMOVING FIX OBJECTS
To avoid machine parts vibration during transportation, some objects are applied to keep the
machine parts fixed. Be sure to remove all these objects before connecting the power wires.
Otherwise, machine damage may occur once the power is turned on.
4.3.3 Before connecting power wires, make sure the machine voltage is in compliance with that of
your factory power source. The electric information of the machine is indicated on a name
plate attached to the front side of the machine.
4.3.4 Once the power wires have been connected, turn the power on and check if all motors run to
the correct directions.
4.3.5 PROPERLY MAKE GROUNDING WORK
Make sure the current supplied to PLC and frequency inverter are stable. Connect grounding
wire properly to prevent the control system from damage by instant current.