DoAll C-260 NC, Инструкция и каталог запасных частей

Страница: 25 / 59

Instruction & Parts Manual
Pag.25
Edition A
F01
"
Hydraulic’s ON / OFF
F02
"
To control the coolant mode
F03
"
Front vise opening
F04
"
Front vise closing
F05
"
Blade speed increase
F06
"
Blade speed decrease
F07
"
Index backward
F08
"
Index forward
F09
"
Index positioning control: type the index position you have to reach, then
press START
F11
"
Head up
F12
"
Head down. Pressed with SHIFT, the head moves down slowly
F15
"
SHIFT.
F17
"
Index vise opening
F18
"
Index vise closing
All the other fuction keys are disable in the standard configuration.
12.1.6 Semi automatic cycle
The operator can run a semiautomatic cycle when he needs to make only one cut. In fact, after fin-
ishing the cut, the machine will stop in this cycle.
To run a semiautomatic cycle is therefore necessary to position the material between the vises, make
sure it is firmily clamped and then press together:
SHIFT +
To stop the cycle, press