DoAll C-260 NC, Инструкция и каталог запасных частей

Страница: 28 / 59

Instruction & Parts Manual
Pag.28
Edition A
Static zero setting axis 1
Dinamic zero setting axis 1
Static zero setting axis 1 with band kerf compen-
sation
Axis 1 test
Operator customizable parameters
SAW 3 programming section
Machine components definition
Machine components parameters
Control type and configuration version
Inputs & outputs list
Hydraulic pump parameters
Front vise parameters
Index vise parameters
Axis 1, type A parameters
Axis 1, type B parameters
Coolant parameters
Band drive motor parameters
Emergencies definition
Warnings definition
Automatic cycle parameters
General parameters
NC control test section
Language selection
PC connection for configuration parameters
download and upload
Material library configuration
VERY IMPORTANT
Never modify the machine parameters without a DoAll technician present. This could cause severe injuries to
the operator and machine failure.
Changing parameters without our written express authorization will immediately interrupt machine warranty and
will keep DoAll armless for any possible injury.