DoAll C-260 NC, Инструкция и каталог запасных частей

Страница: 27 / 59

Instruction & Parts Manual
Pag.27
Edition A
Also, the bottom part of the screen shows the following icons which allow to:
Delete the cutting line underlined
Insert a new cutting line where the cursor is at the moment
To delete all the lines of a program
To go to the first page of the program
To go to the last page of the program
To Save
12.1.7.3 R
UNNING A PROGRAM
Press the RUN key to prepare the machine for the automatic cycle. On the display will appear the
screen of the current program (in case the program is not the one you wan to run, select from the
program directory the one you need to run).
The automatic cycle will start by pressing simoultaneously SHIFT and
To stop the cycle press
Make sure that the cuts counter is set to zero. If necessary to reset only on program line, move with
the cursor to the desired line and press the button. If the operator wants to reset all the pro-
gram lines, then it’s necessary to press to button. The cutting lines already executed will be
marked with the symbol “*” at the left side of the line number.
While in automatic the buttons allows to switch the displayed information between the auto-
matic datas and the machine status icons. Besides, the icon showing the “CLOCK”, gives the cut-
ting times.
12.1.7.4 H
OW TO MODIFY THE CURRENT CUTTING PROGRAM
(PGM
FUNCTION
)
By using the “ PGM ” pushbutton the operator can modify the actif program. It is possible to change
all the program variables, such as name, band speed, cutting lenghts and number of cuts. To make
such changes, please proceed as described in paragraph 12.1.7.2
To save the changes, press OK. To exit without saving, press EXIT.
12.1.8 C
ENNI GENERALI SULLA CONFIGURAZIONE DELLA MACCHINA
To avoid that non authorized personnel could change machine setting parameters, the Saw 3 is protected by passwords.
Level 1 Level 2 Level 3 Level 4 Level 5 Description
To access the machine configuration menus
Zero setting of machine axes
Advanced zero setting s
Static zero setting, axis 2