6
OPERATION
SAFETY PRECAUTIONS
Warning Label - READ and UNDERSTAND
USING THE JOB SELECTOR
1.
Refer to the Job Selector chart located on the
upper bandwheel door. It has information about the
recommended band type and pitch, band speeds
and cutting rates according to the type of material
to be cut and its thickness. It also has a radius
guide that shows the minimum radii cuts possible
with various saw band widths.
2.
To use, find the material to be cut in the first column.
Then move to the right to find information on coolant
application if any, band speed recommendations,
feed rates and band type and pitch.
The Job Selector s a gude only and the
recommendatons shown can be adjusted to
meet specal materal requrements.
Job Selector.
