DNP Imagingcomm America Corporation
43
Replacing the Printer Media
IDW500 User Guide
8.
Feed the paper roll leading edge into the feed path. Align the paper edges with the PC lines on the printer. Feed the
paper under the black guide roller. Continue to feed the paper until the printer beeps. This means that the paper is in
the correct position.
9.
Set the ribbon supply side (two white ends) in the lower, or front, brackets. Set the take-up side (one white and one
yellow end) in the upper, or back, brackets. Insert the left side of the ribbon spool into place first, then snap the right
side of the spool into place. Wind the take-up spool to remove any slack in the ribbon. The supply spool feeds over
the top while the take-up spool feed underneath.
10.
Close the printer media door. Five blank prints are ejected.
11.
Replace the scrap box and the print catch tray.
