DNIPRO M JS-110SF, Руководство пользователя

Страница: 28 / 48

ENG
Jig saw
24
•
«0» position (No pendulum run) - for metals and plastics sawing, as well as for patterned
and “finishing” sawing of wood, fibreboard and chipboard materials;
•
«I» position - for accelerated hard wood sawing;
• «II» position - for wood sawing of medium hardness;
•
«III» position - for sawing of soft wood.
Speed control (fig. 7)
Strokes speed is adjusted with speed controller in the upper part of jig saw body. You shall
be aware that saw speed adjustment during operation is not recommended.
To optimize modes of different materials cutting, you shall set the corresponding number
of the strokes
• high - for soft materials
• low - for hard, strong materials.
1 0
3
0
2
3
1
0
2
3
2
1
MAX MIN
І - for accelerated
hard wood sawing
ІІ - for sawing of wood
of medium hardness
ІІІ - for sawing
of soft wood
0 - metal/plastic, for wood
patterned and «finishing»
sawing of MDF/chipboard
Fig. 6
Fig. 7