DNIPRO M JS-110SF, Руководство пользователя

Страница: 23 / 48

ENG
JS-110SF
19
Before you begin to operate the machine, please read carefully all recommendations
of this manual.
With the purpose of safe use:
•
Keep your workplace clean and tidy. Any obstruction at workplace or on worktable may
cause injury.
•
Pay attention to workplace environment. Ensure good lighting of workplace. Do not
operate the machine near flammable liquids or gases.
• Beware of electric shock hazard. Do not touch grounded surfaces, for example,
pipelines, radiators of heating, kitchen stoves, refrigerators bodies. Do not operate
the machine in the rain or in the snow. Do not use electric machine in premises with
high humidity. Protect the electric tool from rain and moisture. Water ingress into the
machine body may cause electric shock.
• During machine operation, do not let children stay nearby. Do not allow outsiders touch
the machine or extension cord. Outsiders shall not stay at the site of works performed
with the machine.
• Upon completion of work, store the tool in a specially designated place. The special
place for electric machines storage shall be dry, inaccessible for unauthorized persons
and lockable. Storage temperature shall be from -5°С to +40°С. Electric tools shall be
kept out of the reach of children.
• Any work will be performed with a better quality and more safe if electric machines
operate according to prescribed norms, loads, force and operation speed.
• Select proper electric tool for each specific work. Never try to perform any operations
intended for powerful professional electric tools with household electric tool of lower
power. Do not use electric tools for purposes they are not intended for.
• Pay attention to selection of work clothes. Do not wear any loose working clothes or
finery because they can be captured by moving parts of electric machine. For works
outdoor, recommended is to wear rubber gloves and boots that are equipped with non-
slippery soles. Hide long hair under head wear.
• Use safety goggles. Wear a face shield or dustproof mask, i.e. a respirator.
• Prevent damage of electric cord. Never carry the electric tool holding it by the power
cord. Do not pull the cord to take the plug from receptacle. Protect the cord from high
temperatures, chemically active substances or sharp-edged objects.
• Be careful. Ensure to have proper foothold, and do not lose balance.
• Ensure proper technical maintenance and repair of electric tool in a careful and responsible
manner. To achieve better operational characteristics and ensure works safety, handle the
tool with care and keep it clean. Follow instructions in relevant manuals when greasing
and replacing accessories. Examine the electric tool cord at regular intervals, and in case
of damage have it repaired in an authorised service centre. Check out the extension cords
that you use and replace them in case of damage. The machine handles shall be dry and
clean; avoid their contamination with the greasing materials.
• Unplug cord if machine is not in use, before to service or replace accessories.
• Prevent unexpected motor start-up. Do not carry plugged electric tool with your
finger on the start button. Before to insert plug into socket, make sure that start
button is in «Off» position.