3. INSTALLATION
1. Connect supplied power supply to POWER 1 connector. For redundant power
option, connect power supplies to POWER 1 and POWER 2 connectors.
2. Connect Ethernet cable to ETHERNET connector.
Rear View
DEFAULT ETHERNET CONFIGURATION
IP Address:
192.168.10.217
Subnet Mask:
255.255.255.0
Gateway:
192.168.10.1
The USP3 is configured using a standard web browser (Internet Explorer, Firefox, and Chrome).
Enter the USP3’s IP address in the Address/ URL bar, typically located at the top of the web
browser page, to access the Home Page. Use the links on the left side of the Home Page to
access the desired configuration web pages.
All configuration settings are saved in non-volatile memory in the USP3. Settings are retained
when power is removed.
Settings may be uploaded to a computer as a configuration file (.dnf) for storage. Configuration
files may be downloaded from a computer into the USP3 to restore a saved configuration. A
configuration file contains all of the USP3’s configurations except IP address, subnet mask, and
gateway address. The USP3 does not support partial configuration upload or download. The
configuration file is a not a text formatted file. It cannot be viewed or modified with a text editor.
To access the System Configuration web page, use the following log-on when prompted:
Username:
dnfuser
Password:
controls
USP3 User Manual
Page 5 of 46
