Connection Mode For TCP/IP Only
Client Transmit: Establish connection to remote device.
Transmit command. Disconnect from
remote device.
Client Transmit/Receive: Establish connection to remote device.
Maintain connection to remote device.
Server Receive/Transmit:
Accept connection from client.
Only client at assigned IP Address can connect. The client is
responsible for maintaining connection.
Server Mode only, USP3 listens on the following ports:
Port
50001
for connection from Remote Device 1
Port
50002
for connection from Remote Device 2
Port
50003
for connection from Remote Device 3
Port
50004
for connection from Remote Device 4
UDP Attempts For UDP Connection Type only.
The number of times that the message will be sent separated by 10 milliseconds.
Since UDP does not provide guaranteed delivery, UDP Attempts provides more than
one transmit attempt to deliver the message.
IP Address / URL Enter the IP address or URL for remote device to be controlled or monitored.
URL IP Display the IP address associate with URL .
Port Number Destination port number for transmit actions
Source port number for receive events. Set to ‘0’ to receive events from any port
number at remote device IP address.
Heartbeat Rate For USP and GTP-32/DC20 Device Types. Default value is 5 seconds.
Communication error is defined as loss of two consecutive heartbeats.
Connection Status For USP and GTP-32/DC20 device types and TCP/IP connection types only
Displays “Connected” in green when communicating with remote device
Displays “---------“ when NOT communicating with remote device or no IP address
has been entered.
Save Button Click on Save button to save entered settings
Refresh Link Click on Refresh link to refresh Connection Status
USP3 User Manual
Page 14 of 46
