10. GTP-32 / DC20 RECEIVE EVENTS
Event Label Enter any 32 characters. This label is used in the Event Action Table.
GTP-32/ DC20
Event label
Enter the GTP-32 or DC20 Event Label to tally. This Event Label must be listed in the
GTP-32/ DC20’s Event Notification Table with the IP address of this USP3. The entered
Event Label must exactly match the event label in the Event Notification Table.
User Register
Value
For use with “UR_” event labels only.
Enter a value ‘1’ to ‘255’: When the received User Register value matches the entered
value, the event turns ON.
Note- ‘0’ value is treated as an OFF state
NOTE
- The GTP-32/ DC20 Receive Event type event is only displayed in the
Event Action Table for Remote Devices of Device Type “GTP-32/ DC20”.
USP3 User Manual
Page 16 of 46
