DMS AS/400 Скачать руководство пользователя страница 85

Страница: 85 / 96

AS/400 User Guide

Powering the System Off

WARNING: You can stop the system using the Power On/Off button (the large
square white button on the AS/400 CPU unit) if you are in the MANUAL MODE,

however, this is NOT RECOMMENDED because of the errors that may occur with your

data files.

A schedule that automatically powers your system on and off can be setup. You can determine

the time of day you want the system powered on and off and specify special circumstances

that change that normal daily schedule, such as a holiday or special closing. This requires

setting certain system values.

Before you stop the system

Make sure all users are signed off the system and all batch jobs are finished:

Send a message that interrupts all users signed on the system telling them to sign off.

•

Enter "SNDBRKMSG" on command line and press ENTER key

•

Type in message telling users to sign off the system for a power down.

•

Type *ALLACT in the Send to field to send the message to all active users.

Check to make sure all users have signed off the system.

•

Type WRKACTJOB on the command line, press ENTER key.

•

When everyone is signed off the system, the display will show only your job

with status = run. To sign someone off the system, place a 4 in front of the

user and press the ENTER key.

•

Press the F5 (Refresh) to redisplay to make sure your job is the only active

job.

Check the status of any batch jobs that might be affected if the system is powered

down.

•

Type WRKACTJOB on the command line, press ENTER key.

NOTE: If the Work with User Jobs display is shown, you need to switch to basic
assistance level (1) using F21 (Select assistance level).

•

Press F14 (Select other jobs) on the Work with Jobs display.

•

Type "*ALL" in the USER field.

•

In the vertically displayed options type an "N" in every field except

the Message waiting, Running, and Running job held fields. The Work with

Jobs display is shown again with the batch jobs listed.

•

If any job queues have jobs waiting to run, press F22 (Work with Job queues)

to see the Work with Job Queues display.

DMS Systems Corp.

October 13, 2003
Version 1.0

Содержание AS/400

































































































Результаты поиска

Содержание AS/400

Отзывы:

DMS AS/400, Руководство пользователя, Страница: 85 / 96

Результаты поиска

Содержание AS/400

Отзывы: