manualshive.com logo in svg

DMS AS/400, Руководство пользователя, Страница: 34 / 96

Поделиться
Скачать
DMS AS/400 Скачать руководство пользователя страница 34

AS/400 User Guide 

Maintaining User Profiles 

Many administrative processes require changes to User Profiles.  The most common change 
requests are as follows: 

•

 

Password reset when user forgets password 

•

 

Changes to access rights when user changes positions 

•

 

Disable profile when user is terminated or voluntarily leaves the company 

Steps:  

1.

 

Type "WRKUSRPRF"  on the command line and press the F4 (PROMPT) key or 
ENTER key   

OR 

•

 

From Main Menu, select Option 7 

•

 

From Define or Change the System, select Option 3 

•

 

From Security, select Option 6  

2.

 

From Work with User Profiles, enter "xxxx" (xxxx = user profile name) on the user 

profile line to display the specific user's profile.  

3.

 

For each of the situations above, enter "2" beside user name and press enter key: 

•

 

For password resets, enter "*Same" in User Password to reset to same as 

user name 

•

 

For profile disables, enter "*Disable" in Status 

•

 

For other changes such as  access rights, make changes as needed 

•

 

To delete a user profile, enter "4" beside user name.  Note:  Profiles cannot 

be deleted if the user owns objects, such as files, jobs, etc.  These objects 

must be moved to another user before deleting. 

28 

 

DMS Systems Corp. 

 

 

October 13, 2003 

  

Version 

1.0 

Содержание AS/400

































































































Отзывы:

Нет отзывов