DMS AS/400 Скачать руководство пользователя страница 42

Страница: 42 / 96

AS/400 User Guide

Jobs

Execution of routines (called programs) on the AS/400 are referred to as jobs. There are two
types of jobs that run on the AS/400.

Interactive - users enter data at a terminal and receive data back from the AS/400

Batch - a function to be performed or a program to be run is put in line with other
programs or functions to be done “in the background”.

Users can perform other activities while another request is being executed. The AS/400 has

separate areas (subsystems) within the operating system where these activities are

performed. For example, interactive and batch jobs are run in the QINTER and QBATCH
subsystems, respectively.

Other subsystems may exist that are subsystems of either QINTER or QBATCH that handle the

processing of jobs. For example, the DMS D/E application has a subsystem named DMSDOC.

Jobs can be further classified as:

•

Submitted jobs are submitted and waiting for the AS/400 to allot time to start

processing

•

Active jobs are executing routines

There are two ways to check jobs to determine if they are running or waiting to be run:

•

Work with Active Jobs

•

Work with Submitted Jobs

Working with Active jobs

Steps:

Type "WRKACTJOB" on the command line and press the F4 (PROMPT) key or ENTER

key

•

From Main Menu, select Option 3

•

From General System Tasks, select Option 2

DMS Systems Corp.

October 13, 2003

Version

1.0

Содержание AS/400

































































































Результаты поиска

Содержание AS/400

Отзывы:

DMS AS/400, Руководство пользователя, Страница: 42 / 96

Результаты поиска

Содержание AS/400

Отзывы: