DMS AS/400 Скачать руководство пользователя страница 61

Страница: 61 / 96

AS/400 User Guide

Determine Status of Printer

Steps:

Type "WRKCFGSTS *dev" on the command line and ENTER Key. All devices are

displayed.

From Work with Configuration Status, select the device

•

From Work With Device Descriptions, enter Option 8 next to printer and press

Enter Key

In the above example, PRT01 is active and the job that is running is QSPLJOB number

013156. From this screen:

Start A Printer

A printer is varied off by loss of power either to the printer and/or to the display that the

printer is attached to. In order for a printer to work it must be in VARIED ON and it must also

be STARTED.

From Work with Configuration Status, use option 1 to VARY ON a printer that has been

VARIED OFF.

Type "WRKWTR" on the command line and press the ENTER key to display a list of
printers and the status of the writers.

Type "STRPRTWTR xxxx" ("xxxx" is the printer name) on the command line and press

ENTER key. The printer is restarted.

DMS Systems Corp.

October 13, 2003
Version 1.0

Содержание AS/400

































































































Результаты поиска

Содержание AS/400

Отзывы:

DMS AS/400, Руководство пользователя, Страница: 61 / 96

Результаты поиска

Содержание AS/400

Отзывы: