manualshive.com logo in svg

DLS 125, Руководство пользователя, Страница: 69 / 76

Поделиться
Скачать
DLS 125 Скачать руководство пользователя страница 69

revision: 0

FlexxPump 125 (24V)

User Manual

69

EN-

SCHMIERSYSTEME

D I R E C T   L U B R I C A T I O N   S Y S T E M S

D L S

 Carry out the work as described above (steps 1 and 2).

Ü

 If an error was displayed in the LCD before changing the cartridge or battery, the 

message will now disappear, as will the flashing red LED. A separate confirmation is not 

necessary. The green LED flashes briefly every 5 seconds.

Ü

 The FlexxPump 125 automatically returns to the last active mode (ON or OFF) befo-

re the completion of this work.

 If the empty state of the cartridge (Error E1) was reached during a dispensing cycle, 

it is automatically interrupted and continued automatically after completion of the work 

explained above.

9.3 

Disposal

 

When disposing the FlexxPump 125, empty or opened cartridges, observe the rele-

vant national regulations in force.

 

When disposing the FlexxPump 125, observe the relevant safety data sheets and 

disposal instructions for the individual components.

 

 

It is not possible to refill empty lubricant cartridges.

Содержание 125













































































Отзывы:

Нет отзывов