manualshive.com logo in svg

DLS 125, Руководство пользователя, Страница: 12 / 76

Поделиться
Скачать
DLS 125 Скачать руководство пользователя страница 12

revision: 0

FlexxPump 125 (24V)

User Manual

12

EN-

SCHMIERSYSTEME

D I R E C T   L U B R I C A T I O N   S Y S T E M S

D L S

3.2 

Nameplate and designation

The nameplate of the FlexxPump 125 is visibly attached to the side of the pump itself. 

There the CE mark and the serial number of the FlexxPump 125 are visible. Refer to 

chapter 3, Fig. 1 for the location of the nameplate and serial number.

3.3 

Scope of delivery

The FlexxPump 125 is available in several different versions. They differ in the number 

of accessories supplied.  

All versions of the FlexxPump 125 are prefilled with a neutral, food-grade (H1) lubricant 

(approx. 3 cm³), which can be mixed with the lubricants approved by DLS Schmiersys-

teme GmbH, to simplify the initial commissioning. The manufacturer's designation is 

F02.  

Further data and documentation on the lubricant F02 are available on request from 

DLS Schmiersysteme GmbH.

Содержание 125













































































Отзывы:

Нет отзывов