manualshive.com logo in svg

DLS 125, Руководство пользователя, Страница: 31 / 76

Поделиться
Скачать
DLS 125 Скачать руководство пользователя страница 31

revision: 0

FlexxPump 125 (24V)

User Manual

31

EN-

SCHMIERSYSTEME

D I R E C T   L U B R I C A T I O N   S Y S T E M S

D L S

6.3.4  INF-Menu operating mode Hour-Mode -h-

The INF-Menu is used to inform the user about the firmware used in the FlexxPump 

125 and the settings made and currently active (values of the adjustable variables h 

and c that can be changed in the PRO-Menu). In the INF-Menu nothing can be chan-

ged by the user. The values of the parameters are displayed in a fixed order.

n 

Alphanumerical name of the FlexxPump 125 firmware

h 

set value of variable h pause time in hours

c 

set value of variable c number of cycles

125 

set value of the cartridge size

Remove the activation and programming key from the housing of the FlexxPump 125 

and place it on the action area.

Hold the activation and programming key on the action area. The yellow LED lights 

up. Leave the activation and programming key on the action area until INF is displayed 

in the LCD. Remove the activation and programming key from the action area as long 

as INF is displayed in the LCD. The yellow LED disappears; the LCD flashes together 

with the green LED twice.

Ü

 FlexxPump 125 informs you optically on the LCD about the set values.

Insert the activation and programming key into the hole provided on the housing of 

the FlexxPump 125.

The INF-Menu can only be accessed from the OFF mode (FlexxPump 125 is swit-

ched off). When you have entered the INF-Menu, you will return to the OFF mode.

Содержание 125













































































Отзывы:

Нет отзывов