DLI LPC9 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 81

background image

14 AutoPing

61

14

AutoPing

AutoPing can monitor a network device and perform a task if the device stops responding. It can also monitor a
group of devices, the task will be executed if none of the group members respond. The task is either a list of outlets
to reboot or a script to execute.

14.1

Common configuration

AutoPing Properties

Enable AutoPing:

Time between pings:

30

seconds. (2-3600)

Ping timeout to reboot:

150

seconds. (2-3600)

Ping responses to enable autoping:

5

pings. (0-100)

Times to attempt reboot:

5

tries. (1-255)

Device reboot delay:

120

seconds. (1-43200)

Apply

Common AutoPing settings

Be sure to enable AutoPing operation by ticking the "Enable AutoPing" checkbox. Certain

reset procedures

may

turn it off automatically.

The following parameters are used for AutoPing operation:

• Time between pings: This is the time between each ping check of an address. 60 seconds should be useful

for most applications.

• Ping timeout to reboot: This sets the maximum time that sequential communication attempts may fail. Any

failure beyond this time limit will cause the task to be executed. For example, when set to 300 seconds
and a time between pings is 30 seconds, if a target system fails to any pings for 330 seconds, the task
will be executed. The ping that occurred after 300 seconds came at 330 seconds and still failed. Since
occasional network overloads and missed packets can occur during normal network operation, be sure to
choose a reasonable time. AutoPing may handle certain failures immediately instead of waiting for the timeout
if configured to (see below).

• Ping responses to enable autoping: To ensure a reliable connection, autoping will only be enabled after this

many successful pings. We do not recommend changing this (10 is default) unless you must configure your
controller before connecting it to the target devices.

• Times to attempt reboot: If you have an unreliable target device, limit the number of times it will be rebooted

by entering that value here. For example, entering 5 will execute the task up to 5 times before giving up.

• Device reboot delay: After rebooting a device with a cold-boot power-off, a waiting period should occur before

the IP address is re-checked by AutoPing. This delay allows the device to reboot. Windows and Linux servers
can force automatic file system checks which may take several minutes to complete. Enter a safe value here,
for example entering 600 would cause the power controller to start checking the server for normal operation
10 minutes after reboot. If a script is to be triggered, any delays contained in the code being executed should
be considered in determining the delay setting here so that the thread completes before the delay elapses.
This timer starts at the execution of the thread started.

DLI LPC9 User’s Guide: 1.7.24.0

«
...
60
61
62
63
64
...
»

Содержание LPC9


















































































Отзывы:

Нет отзывов

Похожие инструкции для LPC9

Бренд: N-Tron Страницы: 2

Infinity IES-1881

Бренд: LevelOne Страницы: 2

Бренд: Ableconn Страницы: 16

FLOW BOSS VFB-DSU

Бренд: VADA Страницы: 17

Бренд: NBase Communications Страницы: 72

SmartSwitch 2500

Бренд: Cabletron Systems Страницы: 402

Бренд: N-Tron Страницы: 17

Бренд: Comm-Tec Страницы: 48

Бренд: Lightwave Страницы: 53

Бренд: Harman Страницы: 50

Бренд: Tabs Страницы: 4

Бренд: Jerguson Страницы: 4

Бренд: AMAV Страницы: 8

Бренд: Cable Electronics Страницы: 12

Signal Distribution Box SDB45

Бренд: Audiovox Страницы: 12

Бренд: A-Neuvideo Страницы: 9

OMNICUBE F1DK102P

Бренд: Belkin Страницы: 21

Бренд: Hailink Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды